Best AIO Coolers with LCD Screens of 2026

The DC360 Pro leads with a 310W cooling rating and a 2.4-inch IPS screen, and we like that trade for a high-end CPU on a budget: put the money into the radiator and fans, then add a screen that is small but readable. The 240x320 panel is sharp enough for sensor data and a simple image, and the 90.56 CFM fans give it plenty of airflow headroom.

Installation is one of the reasons this one earns a runner-up spot. The mounting hardware is pre-engineered for AM5/AM4 and LGA1851/1700, the fans come pre-installed, and the 2,600 rpm ceramic pump is rated at 15 dBA—a pump figure, not a promise about the whole cooler. The three 120mm fans run up to 2,500 rpm and can make themselves heard at full tilt, so set a gentler curve for everyday use and let the radiator do the work under load.

The screen is the compromise. It is big enough for a four-line readout and small enough that it never dominates the pump, but it is not the panel for a photo-heavy build. If you want artwork or video on the pump, one of the 3.95- or 6.67-inch models here does that better. If you want a strong cooler with a useful display and a sensible price, this is the one we point to.

The HydroShift II OLED Curved 360 is the showpiece of this group: a 6.67-inch 2K OLED panel on a motorized pump head that lifts, rotates, and moves on two axes. It is the only screen here that feels like a small monitor rather than a status readout, and the 500-nit brightness gives it enough punch to survive a bright case.

The hot-swappable magnetic display uses spring pins, so the module comes off without shutting down. The 24mm radiator is slim enough for more cases than the 52mm-thick Wonder Vision, and the pre-installed TL Flex fans are rated to 2,600 rpm. That is a lot of airflow for a 360mm loop, with a 33 dBA noise spec.

We keep this one for display-first builds, not as the default. If you are going to show video, a system dashboard, or a custom animation, the size and contrast are worth the premium. If the screen will mostly show CPU temperature, the Peerless Vision gives you a bigger-than-average panel for much less.

The 6.67-inch panel is also wide enough to change the look of the build. In a compact case it can dominate the interior, which is the point of this cooler but worth deciding before you pay for it. The motorized head is a lot of mechanism sitting on the pump, so treat the screen as the delicate part of the install.

The TUF Gaming LC III ARGB LCD 360 does not chase the biggest screen. It brings a 2.8-inch IPS LCD, a 360mm radiator, and a six-year warranty—the longest coverage in this group alongside the Lian Li LCD-S. The fans come pre-installed on the radiator, and the 400mm sleeved tubing is reinforced, which makes the install feel more like a mainstream build than a boutique project.

We recommend it for the builder who wants a cooler to fit, forget, and still have recourse years later. The 90.78 CFM airflow rating is strong, and the screen is sharp enough for animated GIFs or a clean set of live readings without turning the pump into a billboard. Pre-installed fans and tool-free brackets cut down on the usual parts-bin scramble.

The six-year warranty is the real differentiator. It covers the pump for longer than most, and that matters more than a slightly brighter screen if the cooler is going into a work machine. The TUF is the low-drama choice: no giant panel, no elaborate software hook, just a mainstream 360mm loop with a readable display.

The Wonder Vision 360's 6.67-inch curved screen is the first thing you see, and the edges are also the first thing to think about: a 2400x1080 panel bent around the pump head will distort anything that crosses the curve. Flat dashboards and centered images look clean; edge-to-edge video or fine text can look like it is bending around a corner.

The hardware is serious. A 52mm-thick radiator, a 6400 rpm pump, and three 120mm fans give it more radiator depth than the slim 24mm Lian Li units, and the 27 dBA noise spec is low for this group. The magnetic pump head makes the screen easy to remove, and the 2K resolution is sharp enough for video and animated themes.

The 52mm radiator is the fit check. It needs more depth than the slim Lian Li units, so measure before you commit; this is not the cooler to squeeze into a tight top mount without checking clearance. The magnetic screen and 2K panel are the reward, but the case has to cooperate.

We like this one for builders who want the Lian Li OLED look without flagship money. The 6.67-inch panel is the reason to buy, and the 6400 rpm pump gives it the muscle to back up the show. If you want the big curved screen and can plan the fit, it is a lot of display for the money.

The HydroShift II LCD-S 360 is the tidy-build pick: a 3.4-inch IPS screen, a 24mm-thick radiator, and a sliding tube clamp that lets you line up the tubing instead of living with whatever angle the fittings give you. The screen is hot-swappable on a magnetic pogo-pin connection, and the three CL120 fans come pre-installed.

The 480x480 panel is sharp and bright at 500 nits, and the 2,200 rpm fans are rated for 72 CFM. We kept coming back to the sliding clamp because it solves the part of an AIO install that usually looks unfinished. The six-year warranty is the longest here alongside the ASUS TUF, and the wireless ARGB control cuts down on the usual fan-cable nest.

This is the one for a clean, glass-sided build where the screen matters but does not need to be the whole show. The 3.4-inch display is big enough for a dashboard and small enough to avoid dominating the pump. The catch is connectivity: the screen can fail to hold its connection if the pump mounting screws are tightened all the way down, so check the seating before you finish the build.

The Kraken Elite 360 RGB has a crisp 640x640 square display: a 2.72-inch IPS panel with a 690 cd/m² backlight and a 60Hz refresh. We were surprised by how much the CAM integration changes the pitch—if you already use NZXT's software, the screen can pull in Google Photos, Spotify, and YouTube, which is a different kind of useful from a simple temperature readout.

The hardware is the familiar Kraken formula: a 360mm radiator, a single-frame F360 RGB Core fan, pre-applied thermal paste, and tool-free brackets for AM5/AM4 and LGA1851/1700. The 2,400 rpm fan and 78.86 CFM airflow are competitive, and the 30 dBA noise spec is mid-pack here.

The pump is the part to listen to. A tick at lower rpm can show up, and early pump failures are the reason we stop short of a stronger recommendation. Lock the pump speed, listen for a tick, and test the cooler before the return window closes.

The PF 360's 5.5-inch screen is the biggest display in this group after the 6.67-inch Lian Li and Wonder Vision panels, and it rotates through 90, 180, and 270 degrees so you can angle it toward the glass. The 480x960 resolution is tall rather than wide, which suits a vertical dashboard or a portrait image better than a widescreen video.

The rest of the spec sheet is aimed at high-TDP builds: a 320W rating, a 2,700 rpm pump, and three 120mm fans running up to 2,000 rpm. The 27mm radiator is thinner than the Wonder Vision's 52mm, so it fits more cases, and the magnetic screen mount makes it easy to pull off for cable work.

The 5.5-inch panel is best used as a vertical dashboard; a wide video will waste the top and bottom of the display. That is not a flaw if you want a tall sensor stack or a portrait image, but it is the wrong screen for a landscape animation. Plan your content around the aspect ratio before you buy.

We recommend the PF 360 for builders who want a huge portrait screen and 320W cooling headroom without paying flagship money. The screen is the reason to consider it, and the 320W rating gives it the muscle to handle a serious CPU. If you want the display to behave like an appliance, the ASUS or Peerless is the safer call.